Does a P3 filter mean a respirator is TH3?

No. P3 describes the filter's efficiency, while TH3 describes the certified performance of the complete powered respirator. A device can use a P3 filter and still only be certified to TH2, because the TH rating depends on the whole system (blower, airflow, hose, headtop and filter) tested together, not the filter alone.

What is the difference between TH2 and TH3?

TH2 has an Assigned Protection Factor (APF) of 20 and TH3 has an APF of 40, so TH3 provides twice the protection of TH2 under EN 12941. TH2 is appropriate where a COSHH risk assessment shows exposure falls within its range. Many organisations choose TH3 for the extra headroom and flexibility across varied tasks.

What is the APF of a TH3 respirator?

A TH3 powered respirator has an Assigned Protection Factor (APF) of 40, meaning it is designed to be used in atmospheres up to 40 times the Workplace Exposure Limit, subject to a suitable risk assessment.

Is TH3 always the right choice?

Not automatically. The correct level of respiratory protection should always be determined by a suitable COSHH risk assessment. TH3 offers the highest certified protection under EN 12941, but a lower rating may be appropriate depending on the contaminant, concentration and task.

Do you need a face fit test for a TH3 powered respirator?

Loose-fitting powered respirators, including TH3 devices like the AirMask 1000, do not require face fit testing because they do not rely on a tight seal against the skin. This is different from tight-fitting masks (disposable, half and full-face), which legally require a face fit test for each wearer under HSE guidance.

Can you wear a TH3 powered respirator with a beard?

Yes. Because loose-fitting powered respirators do not seal against the face, they can be worn with beards, stubble and other facial hair. Tight-fitting masks cannot, because facial hair breaks the seal they depend on, so a loose-fitting powered respirator is often the only effective option for workers with beards.